The airplane is a great invention. With it, humans can soar into the sky. However, in recent years, there have been more and more incidents of civil aviation aircraft, which shows that humans still need to work harder to develop safe aviation. Aviation lights are a way to allow flight. Safer props. Our country has also made very detailed regulations on aviation lights to reduce the possibility of incidents. Here is a brief introduction to the regulations of aviation lights

One or more aviation obstruction lights must be installed on the top of high-rise buildings to aid navigation safety. Obstacle lights must be installed between 1.2 meters and 3 meters above the top of the building; aviation obstruction lights must be installed on the middle layer more than 45 meters above the ground, and the location of the middle layer obstruction lights shall be made as far as possible The distance between each layer of lights should be as equal as possible, and the distance between low and medium intensity obstruction lights must not exceed 45 meters. For large buildings, each corner of the building should be fully considered when setting up the lights. The outline of the building should be seen from each corner. The horizontal direction should refer to the design requirements of ≤ 45 meters per floor; above 150 meters For high buildings, high-intensity aviation obstruction lights must be installed at the top, and used in combination with medium-intensity obstruction lights to show its existence.

The effective light intensity of the obstruction lights are: low-intensity obstruction light effective light intensity 1500cd, red flash or constant light, medium-intensity obstruction light effective light intensity 4000cd, generally red flash, high-intensity effective light intensity 40000cd, generally white flash .

Lightning protection: The aviation obstruction light at the top should be equipped with a lightning arrester, and the lightning arrester part should be closely connected to the lightning protection belt and other facilities. The light fixture in the middle of the building should be protected by a metal mesh cover and be connected to the metal part of the light fixture. All are well grounded.

When you buy lighting equipment in the future, you must first understand the quality before making a decision.